The other fatal 4: report warns of less-considered major construction health hazards

iStock 494827428

Ask anyone familiar with construction hazards, and you’ll likely hear about those on OSHA’s Top 10 Safety Violations annual list or the agency’s Fatal Four — falls, struck-by incidents, electrocutions and caught-in-between accidents.

The danger of falls, in particular, has garnered the industry’s attention as the most common cause of accidental construction injuries and deaths. And the agency has shown its commitment to enforcement in this area, as often the most-cited violations are related to OSHA’s fall protection standard.

However, the American Industrial Hygiene Association, in its “Focus Four for Health: An Initiative to Address Four Major Construction Health Hazards,” is trying to make the industry aware of other site conditions that also pose a major threat to construction workers. They are:

Manual material handling

The AIHA publication says that the handling of construction materials can result in overexertion due to the lifting, pulling, pushing and carrying associated with this common task. These physical movements while handling materials are the top cause of work-related musculoskeletal disorders, which make up more than 30% of all work-related construction injuries and approximately half of all workers’ compensation costs.

Noise

High noise levels are linked to myriad conditions including hearing loss, tinnitus — a chronic ringing in the ears — sleep disturbances, cardiovascular disease, hypertension, depression and balance impairment. The AIHA said that, according to its research, almost 75% of construction workers likely have been exposed to noise levels above the recommended exposure limits set by the National Institute for Occupational Safety and Health.

Air contaminants

Asthma, irritation to chronic obstructive pulmonary disease, nervous system problems, kidney damage and cancer are just some of the short-term and long-term conditions that can be caused or exacerbated by dust, fume, vapor and gas exposure on a jobsite.

More than 50% of construction workers have reported that they are regularly exposed to these substances twice a week or more on the job. This could be one of the reasons, the AIHA said, that the risk for developing an occupation-related disease is two to six times higher for career construction workers than it is for those who have spent most of their working years in other industries.

High temperatures

Exposure to high temperatures on the jobsite can lead to a variety of heat-related conditions — heat exhaustion, heat syncope, heat cramps, heat rash — but heat stroke is the most serious. Heat stroke can cause death or permanent disability if ignored. Those who are new on the job are particularly vulnerable to heat illness.

While OSHA has no specific standard for heat, the agency recommends that employers train their employees on how to recognize the signs of a heat-related condition in themselves and others, as well as provide shade, water and frequent breaks to those workers exposed to high temperatures.​

Source: Construction Dive

Similar Posts

  • PREPARE FOR RECOVERY

    FacebookXRedditPinterestEmailLinkedInWhatsAppBy Cliff Robbins, MSBDC Senior Business Advisor NOW what do I do?”  This is the question on every small business persons’ mind. Well, this is the time to prepare yourself for a post-coronavirus world: Especially because you have probably been forced to shutter or otherwise change your business approach. CFIMITYM – Cash Flow Is More Important…

  • Study finds maternity benefits for construction tradeswomen financially feasible

    FacebookXRedditPinterestEmailLinkedInWhatsAppAt a 2016 conference for women in construction, iron worker Bridget Booker stood up and recounted how, as a second-year apprentice, she miscarried after a very heavy day on the job. Booker told the audience she felt she had had no option but to continue to work when she became pregnant. Without work, she would…

  • Worker Exposure Risk to COVID-19

    FacebookXRedditPinterestEmailLinkedInWhatsAppClassifying Worker Exposure to SARS-CoV-2 Worker risk of occupational exposure to SARS-CoV-2, the virus that causes COVID-19, during an outbreak may depend in part on the industry type and need for contact within 6 feet of people known to have, or suspected of having, COVID-19. OSHA has divided job tasks into four risk exposure levels,…

  • Alternative Funding Options for Houston’s Small Businesses

    FacebookXRedditPinterestEmailLinkedInWhatsAppSince the onset of the COVID-19 pandemic, businesses of all sizes in nearly every sector are facing financial hardship brought on by the crisis.  As the economy gradually reopens, local and state orders with restrictions on business operations have presented challenges for business continuity, especially for small to medium sized-enterprises. While legislators have made record emergency funds available through federally-backed…

  • Autonomous technologies can help alleviate the labor shortage

    FacebookXRedditPinterestEmailLinkedInWhatsAppRobots, machinery and software promise to aid with the skilled labor shortage, or at the very least free up managers’ and other workers’ time so they can focus on more important tasks.  In the next three decades, as many as 2.7 million construction jobs could become automated, according to a report from the Midwest Economic Policy…

  • Updated Tools Helps Power Supply Designers Get to Market Faster

    FacebookXRedditPinterestEmailLinkedInWhatsAppYou’re an engineer on a tight schedule to design a power supply for a robot that will automate a factory. Or maybe you’re designing the power supply for an automotive braking system. Or a remote-controlled toy airplane.  Or a smartphone. You’ve got decisions to make. You need a switching regulator for DC/DC conversion, but there…